Vintage Motorola: secret codes, reset, unlock and problem solutions

Many vintage Motorola phones such as StarTAC, V3 Razr, V50, V3688, Timeport and MicroTAC can show locks, startup problems, code requests or software errors after years of use.

In this guide you'll find useful codes, reset procedures and practical solutions.

Most sought-after Motorola models

• Motorola StarTAC
• Motorola RAZR V3X
• Motorola V50
• Motorola V3688
• Motorola Timeport

Useful Motorola codes

• *#06# — Show IMEI
• *#9999# — Phone information menu (on many models)
• *#300# — Show software version
• *#403# — Network test and status

Motorola security code

Many Motorola phones used default codes.

Frequently used codes:

• 000000
• 1234
• 12345
• 0000

If the phone is second-hand, the previous owner may have changed the code.

Reset Motorola V3 / V-Series

For many models:

1. Menu
2. Settings
3. Initial Setup
4. Master Reset

A code may be requested.

Hard reset Motorola smartphones

On many Android Motorola models:

1. Turn off phone
2. Hold Volume Down + Power button
3. Enter Recovery
4. Wipe Data / Factory Reset

Problem: Motorola stuck on logo

Possible causes:

• Flat battery
• Damaged firmware
• Faulty SIM
• Corrupted memory

Try:

1. Remove battery
2. Remove SIM
3. Wait 30 seconds
4. Turn back on

Problem: white Motorola screen

• Display flat cable
• Worn battery
• Firmware
• Contact oxidation

Other vintage Motorola available

Discover all Vintage Motorola

Infosate selects original vintage phones verified and tested since 2007.